Comfort

E-Shop : Comfort Heating : Ceiling Unit Heaters

CEILING HEATERS
FFCH: Commercial Rated
    Downflow Ceiling Unit Heater
You MUST have Adobe Acrobat Reader to view any literature downloaded from this website.
In the Ceiling..
Or on it!
• Field Convertible 2,000 to 5,000 Watts
• Phosphatized Baked Enamel Finish
• Wall or Unit-Mounted Thermostat
• Easy, Single-Person Installation
• Automatic Thermal Cutout
• Adjustable Air Flow Patterns
Silver Metal - 5 Year Warranty!
UL listed - FILE #21609
  • The FFCH ceiling-mounted fan-forced heaters are designed for commercial and industrial areas requiring electric fan-forced heat. Capacities are 2,000 to 5,000 watts.
  • FFCH-SE surface enclosures are designed to mount flat on the ceiling and extend only six inches into the room.
  • FFCH-RE enclosures have no protrusions outside the recess box, allowing the heater to recess only seven inches into ceiling space. Mounts into permanent ceiling with trim ring.
    Built-In Fan Delay — Space temperature is controlled by a wall or unit-mounted thermostat. When the thermostat calls for heat, the heating elements and fan energize. When the thermostat is satisfied, the elements shut off, but the fan continues to operate until all of the heated air is discharged. This feature avoids exposing the heater to residual heat, thus achieving a high comfort level and longer component life.
    Automatic Thermal Cutout — A thermal cutout shuts off the heater in the event of overheating and reactivates the heater when the temperature returns to normal.
    Multiple Phase Heaters — The 208 and 240 volts heaters can be field converted from single to three-phase operation. 277 volt single-phase heater is also available.
    Multiple Wattage Heater Sections — The 5,000 watt heater can be field converted to 3,800 watts or 2,500 watts, and the 4,000 watt heater is convertible to 3,000 or 2,000 watts.
    Thumb Pins align and temporarily hold the enclosure cover to the heating section freeing both hands to finish installation.

  • SELECTION CHART
    Heater Section
    Catalog
    Number
    VOLTS
    PHASE2
    KW1
    BTU/HR.
    AMPS4
    CFM
    °F&T
    SHIP WT. (lbs.)
    Price Add To
    Cart
    FFCH548
    208
    1-3
    4
    3
    2
    13.7
    10.2
    6.8
    19.2
    4.2
    9.6
    283
    51
    27
    548.89
    FFCH542
    240
    1-3
    4
    3
    2
    13.7
    10.2
    6.8
    16.7
    12.5
    8.3
    283
    51
    27
    548.89
    FFCH547
    277
    1
    4
    3
    2
    13.7
    10.2
    6.8
    14.4
    10.8
    7.2
    283
    51
    27
    548.89
    FFCH558
    208
    1-3
    5
    3.8
    2.5
    17.1
    13.0
    8.5
    24.0
    18.3
    12.0
    396
    45
    27
    603.88
    FFCH552
    240
    1-3
    5
    3.8
    2.5
    17.1
    13.0
    8.5
    20.8
    15.8
    10.4
    396
    45
    27
    603.88
    FFCH557
    277
    1
    5
    3.8
    2.5
    17.1
    13.0
    8.5
    18.1
    13.7
    9
    396
    45
    27
    603.88
    Mounting Kits
    CATALOG
    NUMBER
    DESCRIPTION
    SHIP WT. (lbs.)
    Price Add To
    Cart
    FFCHSE
    Surface Mounting Enclosure Only - To Be used With Above Heater Sections. Dimensions: 20”L x 16-1/2”W x 5-3/4”D.
    10
    185.58
    FFCHRE
    Recess Mounting Enclosure Only - To Be Used With Above Heater Sections. Dimensions: 23-3/4”L x 23-3/4”W x 7”D.
    18
    185.58

    ACCESSORIES
    CATALOG
    NUMBER
    DESCRIPTION
    Price Add To
    Cart
    FFCHT
    Thermostat SPST Range 45 Degree to 95 Degree F.
    68.73
    FFCH24R
    Relay (Time Delay 45-60 Sec. to Close When Energized) Requires 24 Volt Supply From Remote Source.
    41.49
    FFCHR12
    Relay (Time Delay 45-60 Sec. to Close When Energized) Requires 120 Volt Supply From Remote Source.
    41.49
    FFCHDS
    Power Disconnect Switch (3-Pole) 30 Amps, 600 Volts, 3Ø, 20 Hz.
    167.42
    FFCHTK
    Trim Kit for Mounting on Permanent Ceiling (Cannot Be Factory Installed).
    29.21
    FFCHTR4
    208/240V Primary Transformer/24V sec. and 24V Holding Coil Control Relay.
    65.30
    FFCHTR7
    277V Primary Transformer/24V sec. and 24V Holding Coil Control Relay.
    65.30
    1 Factory Wired for Highest Wattage, Field Convertible to Lower Wattages.
    2 Factory Wired 1Ø, Field Convertible to 3Ø.
    3 For Factory Installation of Above Controls, Add $60.00. Not Applicable on 20 or More Heaters.
    4 Amperage Shown Is for Single Phase.
    These items have a 2 week lead time

    We've seen your application. Call Us for application Assistance

    (901) 452-4516